Starrett 2000-24 Altissimo Electronic Height Gage - Manual (Page 17)

Symbols
Starrett Altissimo Operation Manual Page 16 CAT 2000-24
Status Description
Datum - Indicates if Active Datum is Established (Continuous) or Not Established (Flashing)
Probe Calibration - Indicates if Probe Diameter is Calibrated (Continuous) or Not Calibrated
(Flashing)
Hit Indicators – Bars above and below Probe Calibration, which indicates when points are
taken (Continuous) or can be taken (Flashing).
Probe Force - Indicates that Probe Force Level is changed from Calibration Force.
Battery Low - Indicates Low Battery Level (Plug in Charger).
Measurement
Description
Height - Display is Height Measurement
Distance Between Features - Display is Distance between the last two features measured
Center – Display is Distance from Active Datum to Center
Diameter – Display is Diameter
Distance Between Points – Display is Distance Between the points used to measure the
feature.
TIR – Display is the TIR (Total Indicated Reading) or Max – Min Point
MAX – Display is Max value of scanned surface
MIN – Display is Min value of scanned surface