Starrett 2900 Capacitive Electronic Indicator User Manual

Page 6

Setting the PRESET Function*

1. To set a value, press and hold the ZERO/ABS

button until the ABS icon appears in the upper

right corner of the LCD (right). The values can

be SET to: +/-99.99999" or +/-9999.999mm.
2. Press the SHIFT/SET followed by the PRESET

button. The SET (S) and PRESET (P) icons will

appear in the upper left corner of the LCD. The

PRESET icon will be flashing (middle right).
3. To move from the PRESET icon to a digit,

press the SHIFT/SET button. A flashing digit

indicates that it is ready to be SET (lower right).

Press the PRESET button to increment the

value. To set, press the SHIFT/SET button.
4. To move to the next digit press the SHIFT/SET

button and repeat step 3. Repeat steps 2 and

3 until all the digits are SET.
5. To set a negative value, press PRESET when

the plus/minus sign icon is flashing.
6. To exit the PRESET function, press the PRESET button when the PRESET icon is

flashing. The SET value will remain displayed.
7. Press and hold the ZERO/ABS button to return to the active measuring mode.

Press

Then

to enter Preset Mode

to increment the value of the digit or the plus/minus sign

Press

to cycle from digit to digit and back to preset

Setting MIN/MAX Limits (Go/No Go Function)*

1. Select the units to be displayed.
2. Press the SHIFT/SET button. The SET icon will

appear in the upper left (right).
3. Press the LIMITS button. The MIN LIMIT icon

will appear in the upper middle of the display.
4. Press the SHIFT/SET button. The LIMIT icon

will flash on/off.
5. Adjust the spindle to the desired minimum value.

* Available on 2900-5 Advanced Features Models

2900 Capacitive Series Indicator User Manual