Pattern programming – Star Headlight & Lantern 7400 Laser M User Manual
Page 9
-7-
Before changing the pattern, please review these key points about programming the lightbar:
• The default pattern for this lightbar will produce an Alternating Quintflash pattern that
alternates between the two halves of both the passenger side and driver side (9 sec shortcut).
• The driver's side circuit and passenger's side circuit are programmed with different wires. The
colors will vary depending upon your harness. Review the chart on page 1 that corresponds
to your harness to identify the color of each of the programming wires.
• The two sides are usually programmed at the same time by connecting the two pattern
programming wires together. The only exception typically will be when you wish to set the two
sides for patterns that differ from one another.
Pattern Programming
Flash
Pattern #
M-Tech Plus™ Warning Light Pattern Description
Shortcut
1
Alternating Flicker
3Sec
2
Alternating Fast Double Flash
3
Alternating Triple Flash
4
Alternating PSU Flicker
5
Alternating PSU Random
6
Alternating Quad Flash
6Sec
7
Alternating Quad Flash w/Post-Pop
8
Alternating Single Flash
9
Alternating Slow Double Flash
10
Alternating Variable
11
Alternating Post Pop (Amber Value versions)
Alternating Quintflash (All others)
9Sec
(SHORTCUT FOR ALL EXCEPT
AMBER VALUE VERSIONS)
12
Alternating Random (Amber Value versions)
Swing (All others)
13
Alternating Quintflash (Amber Value versions)
Alternating Fast Doubleflash, Alternating Flicker (All others)
9Sec
(SHORTCUT FOR AMBER
VALUE VERSIONS ONLY)
14
Alternating Fast Doubleflash, Alternating Flicker
(Amber Value versions)
Alt. Quad, Alt. Flicker, Alt. Double, Flicker (All others)
15
Alt. Quad, Alt. Flicker, Alt. Double, Flicker
(Amber Value versions)
Counter Clockwise Rotation (All others)
16
Simultaneous Quad w/Post Pop (Phase 1)
12Sec
17
Simultaneous Quad w/Post Pop (Phase 2)
18
Alt. Triple, Alt. Non-Synch Double, Alt. Quint, Flicker
19
Steady burn one side, Other side Single Flash
20
Cycle All
21 ☼
Quad w/Post Pop, Fast Double w/Post Pop ☼
22 ☼
Alternating Non-Synch Double ☼
23 ☼
Swing, Flicker ☼
24 ☼
Slow Double, Fast Double ☼
25 ☼
Alternating Fade ☼
26 ☼
Simultaneous Flicker (Phase 1) ☼
15Sec
27 ☼
Simultaneous Flicker (Phase 2) ☼
28 ☼
Simultaneous Tripleflash (Phase 1 ☼)
29 ☼
Simultaneous Tripleflash (Phase 2) ☼
30 ☼
Simultaneous Doubleflash (Phase 1) ☼
31 ☼
Simultaneous Doubleflash (Phase 2) ☼
32 ☼
Simultaneous Quadflash (Phase 1) ☼
33 ☼
Simultaneous Quadflash (Phase 2) ☼
34 ☼
Sim. Quad (Phase 1), Alt. Triple, Sim. Flicker (Phase 1), Alt. Fast Double ☼
35 ☼
Sim. Quad (Phase 2), Alt. Triple, Sim. Flicker (Phase 2), Alt. Fast Double ☼
Pattern Shortcuts: Hold Pattern Select Wire to +12VDC for indicated time.
☼
Patterns 21-35 are NOT included in the Amber Value versions