Terminal ldf375-2 flash patterns – Star Headlight & Lantern 8600 Series Intercepto - 66" Tow Packages User Manual
Page 16

-13-
Pattern Warning Pattern Style
1
Pursuit Mode
(1 flash/3 sec default)
2
Alternating Slow Single (1,3 vs 2,4)
(Title 13 Approved)
3
Alternate Pursuit Mode
4
Alternating Quad Flash (1,3 vs 2,4)
5
Alternating Triple (1,3 vs 2,4)
6
Alternating Quint (1,3 vs 2,4)
7
Simultaneous Slow Single (All Modules)
(Title 13 Approved)
8
Simultaneous Fast Single (All Modules)
9
Simultaneous Triple Flash (All Modules)
10
Simultaneous Quad Flash (All Modules)
11
Simultaneous Quint Flash (All Modules)
12
Simultaneous Fast Triple Flash (All Modules)
13
Simultaneous Fast Quint Flash (All Modules)
14
In/Out Single (1,3 vs 2,4)
15
In/Out Triple (1,3 vs 2,4)
16
In/Out Quint (1,3 vs 2,4)
17
Simultaneous Double Flash, Post-Pop
(2 flashes/6 sec default)
18
Simultaneous Triple Flash, Post-Pop
19
Simultaneous Quint Flash, Post-Pop
20
Alternating Double Flash, Post-Pop (1,3 vs 2,4)
21
Alternating Triple Flash, Post-Pop (1,3 vs 2,4)
22
Alternating Quint Flash, Post-Pop (1,3 vs 2,4)
23
Alternating Pre-Pop Quint Flash (1,3 vs 2,4)
24
Sequential Back And Forth
(3 flashes/9 sec default)
25
Sequential In/Out
26
Burst All w/ Alternating Burst
27
Alternating Burst w/ Simultaneous Double Then Quint
28
Simultaneous Burst w/ Alternating Double Then Quint
29
Hyper-Random
30
Demo (Cycle Through Patterns 1-4,6-9,13-20,25-29)
The numbers in parenthesis in the list above indicate which output pairs flash
together vs. the pairs they flash opposite from.
Please Note: Please Note: At any time during the programming sequence, you can reset
the flash pattern back to any of the default patterns (Pattern 1, 18, or 24) by
holding the red w/green Pattern Select wire to +12VDC until the heads flash
the specified number of times, then release it.
(Remote LED Flasher Pattern Programming CONT’D)
10-Terminal LDF375-2 Flash Patterns
(touch Red w/Green to +12VDC)
(Used for Versa Star or Batwing Alley Lights and Takedown/Pursuit Lights)