Star Headlight & Lantern BKDLXT - Manual (Page 3)

-3-
P
h
a
s
e
1
F
la
s
h
P
a
tt
e
rn
#
P
h
a
s
e
2
F
la
s
h
P
a
tt
e
rn
#
P
a
tt
e
rn
T
y
p
e Pattern Description
Shortcut
1 11 A Fast Singleflash (1.9 CPS)
Pattern 1 (Phase 1) :
3 sec or 1 flash
Pattern 11 (Phase 2) :
9 sec or 3 flashes
2 12 B Flicker flash (1.7 CPS)
3 13 C Post pop (1.4 CPS)
4 14 D PSU-flicker (0.4 CPS)
5 15 E Random (1.9 CPS) (DEFAULT PATTERN)
6 16 F Quadflash (1.0 CPS)
Pattern 6 (Phase 1) :
6 Sec or 2 flash
Pattern 16 (Phase 2) :
12 sec or 4 flashes
7 17 G Quadflash w/Post-Pop (1.0 CPS)
8 18 H Singleflash (1.0 CPS)
9 19 I Doubleflash (1.0 CPS)
10 20 J Delta-Omega (0.3 CPS)
N/A Steady (see below) 18 sec or 6 flashes
Pattern Shortcuts: Short Pattern Select Pins for indicated
time.
Steady Burn: Not in pattern cycle. Only accessible through
shortcut.
In/Out Pattern
(Programmed for opposite Phases)
Back & Forth Pattern
(Programmed for same Phase)
Light 1 Light 2 Light 1
(ON) (OFF)
Light 2 Light 1 Light 2
(OFF) (ON)
Simultaneous Pattern
(Programmed for same Phase)
Light 1
T
IM
E
Alternating Pattern
(Programmed for opposite Phases)
Light 2
Split Mode
(Dual Colored)
Single Mode
(Solid Colored)
You can synchronize up to six Constellation lights using the BKLD418-2 (sold separately).
• Lights with the SAME phase flash together (simultaneous).
• Lights with DIFFERENT phases flash opposite one another (alternate).
1. Connect all lights you want to flash
simultaneously to the BKLD418-2 and
power it up by connecting the Black wire
to ground and the Red wire to power.
2. Touch and release a screwdriver across
both Pattern Programming Pins to change
patterns.
3. After programming, remove power and disconnect the lights from the BKLD418-2.
4. Connect all of the other lights you want to flash opposite from (alternate with) the lights
you just programmed to the BKLD418-2 and power it up.
5. Touch and release a screwdriver to both Pattern Programming Pins to change patterns
until you get to the same Pattern Type, but the opposite Phase.
6. Remove power, connect all lights, and power up to test.
Pattern Programming and Synchronization
Please Note: Solid colored BKDLXT lights are programmed for Single Mode and dual
colored BKDLXT lights are programmed for Split Mode.