Spectrum Controls 2080sc-NTC - Manual (Page 5)

Micro800™ 4 Ch Universal Thermistor Input Module 5
Publication 0100198-01 Rev. A
Insert Module into Controller
Follow the instructions to insert and secure the plug-in module to the
controller.
1. Position the plug-in module with the terminal block facing the
front of the controller as shown.
2. Snap the module into the module bay.
3.
Using a screwdriver, tighten the 10…12 mm (0.39…0.47 in.) M3
self-tapping screw to torque specifications.