Care and maintenance, Belt tension – Dixon ZTR 5425 User Manual

Page 28

Text mode
Original mode

Page 28

REAR
HANGER
PIN

BELT TENSION

ENGINE TO MOWER DECK BELT

42" and 50"

P/N 6111

60"

P/N 6938

The engine to mower deck drive belts are automatically held in proper
tension by springs which push the deck assembly forward and do not
require any additional adjustment to be made.

MOWER DECK SERPENTINE BELT

42"

P/N 6109

50"

P/N 1300

60"

P/N 6939

Refer to illustration for adjustment procedure.

NOTE:

Belt deflection or movement should be approximately 1/4" when
measured at mid-point between pulleys.

Periodically inspect both belt and idler systems.

CARE AND MAINTENANCE

TIGHTEN OR LOOSEN

HEX NUT TO ACHIEVE

THIS DIMENSION

50" & 60" 5/8"
42" 3/4"