Dixon ZTR 5425 - Manual (Page 18)

Page 18
CONTROLS
BLADE DRIVE:
Located on control panel, on operator's right.
To engage blades: Pull up on the switch.
To disengage blades: Push down.
CIRCUIT BREAKER:
Located on control panel, on operator's right.
Protection of the electrical system is by
(1) 15 amp circuit breaker.
If circuit breaker trips, push button to reset.
If this condition repeats, consult dealer for
inspection and repair.
MOWER DECK CUT HEIGHT LIFT LEVER:
Located to the right and front of operator.
Controls the cutting height.
Seven positions of adjustment.
Depress trigger and move lever forward to
lower deck.
Depress trigger and pull lever back to raise
deck.
NOTE: Always use high position for transport.