Dixon ZTR 5425 - Manual (Page 16)

Page 16
CONTROLS
PARKING BRAKE:
CAUTION
Engage parking brake before starting engine
The parking brake is designed to hold the mower from
moving and is not intended for use in stopping the mower
while it is in motion.
TO SET PARKING BRAKE:
The hand operated parking brake is located at
left hand side of mower.
To engage brake, pull lever up (to the rear).
To release brake, move lever forward (down).
NOTE: Always set parking brake before dismounting.
Release parking brake before moving mower.
HYDRO-GEAR DRIVE SYSTEM:
Allows the mower to turn on its own axis (zero turning radius).
Each lever controls one side of the mower.
NOTE: The pressure required to operate the mower is very light.