Description of controls, Input section, 3 description of controls – Sonnox Oxford Inflator User Manual
Page 10: 1 input section

3 DESCRIPTION OF CONTROLS
3 DescriptionofControls
3.1 InputSection
INPUT fader
sets the input level to the Inflator process. For full level input signals, maximum peak
input is obtained with the fader set to 0dB. Further gain beyond is provided to allow
lower level programme to be boosted to full modulation, and allows the Inflator to be
deliberately overdriven to produce distortion effects.
INPUT value
shows the value in dB of the parameter set by the input fader. The value can be
modified by clicking in the window.
INPUT meter
the input meter displays the input drive levels. With the
CLIP 0dBr button (in the
Effect section) de-selected, the meter displays the level of overdrive applied to the
Inflator process. The meter will be mono or stereo depending on the material
content.