Description of controls, 8 description of controls – Sonnox Oxford EQ including GML User Manual
Page 19
8 DESCRIPTION OF CONTROLS
8 DescriptionofControls
The plug-in’s user interface consists of two sections for EQUALISATION and FILTERING
functions.
ResponseDisplay
Displays the currently active EQ and filter response curves. The graph will rescale to
match the current sample rate.
LF andHF FilterSections
The
LF and HF buttons switch the relevant filter in/out. The numeric button above
determines the slope of each filter from 6dB – 36dB/octave in 6dB/octave steps.
The rotary control determines the filter turnover frequency.
LF,HF,LMF,LMF Sections
The
FREQ control sets the centre frequencies for bandpass or turnover frequencies
for shelf curves. The Q control determines the bandwidth of EQ curves, and sets the
amount of overshoot function for shelving sections.
Two buttons to the left and right of the
LF and HF gain controls select the shelving
function for these sections.