SkyRC Quattro Micro Battery Charger - Manual (Page 4)

Manufactured by
SKYRC TECHNOLOGY CO., LTD.
www.skyrc.com
RoHS
When there is an error, the LED will blink red twice per second with audible sound. After ten
times of blink, the read LED will stay on and the 4-digital LED will display the error code,
ERROR MESSAGE
WARRANTY AND SERVICE
We guarantee this product to be free of manufacturing and assembly defects for a period
of one year from the time of purchase. The warranty only applies to material or
operational defects, which are present at the time of purchase. During that period, we will
repair or replace free of service charge for products deemed defective due to those
causes.
For any repair or replace service, please contact your dealer in the first instance, who is
responsible for processing guarantee claims. This warranty is not valid for any damage or
subsequent damage arising as a result of misuse, modification or as a result of failure to
observe the procedures outlined in this manual.
SPECIFICATION
AC Input
DC Input
Charge circuit power
Charge current range
Net weight
Dimension
100-240V
11-15V
4X4W ±10 %
0.1-1.0A ±10 %
280g
132x100x50mm
Battery connector type
Micro / Micro Reverse/
MX / mCPX
Battery type 4X1 cell LiPo
Working temperature 0-50 ℃
Dead cell or voltage of cell is too high or too low for safe charging.
The battery polarity is connected incorrectly.
The battery connection is wrong.
Short circuit or over current in the battery.
The DC input voltage is too high or too low.
-11-
-22-
-33-
-44-
-55-
Error Code Error Message
4
7504-0412-02