SkyRC Quattro Micro Battery Charger - Manual (Page 2)

When using 12V lead acid battery,
When using AC power source
1. Insert the AC power cord into the charger.
2. Insert the AC power cord into a wall socket (100-240V).
3. When the charger is powered on, 4 status LEDs will blink once with one beep and all
4-digital LED Indicators will display 8888. After that, 4 LEDs will extinguish and all 4-
digital LED Indicators will display the charging current which indicates the charger is
ready to charge.
Caution: Each charging port can only charge one kind battery at same time.
Four independent ports can be used at the same time
Four different kinds of battery connectors in each port
Four independent functioning charging circuits
Four independent 4-digital LED displays current and capacity
LED and audible sound indicate charging status
Adjustable charging current from 0.1-1A
AC/DC Dual Power Input
Efficient ventilation
Maximum protection: short circuit protection; over current protection; battery reverse
polarity protection and DC input voltage protection
FEATURES
CHARGE PROCEDURES
Getting Started
2
Using DC cable
attaching to car
battery