SkyRC D100 Charger - Manual (Page 5)

03 · D100
Twin-channel Charger
SKYRC D100 allows you to plug 2 batteries into one charger simultaneously, and it will
intelligently and automatically charge 2 battries at once to their maximum capacity. To top
of it, the batteries being charged do not even need to have the same configuration. You
can connect different chemistry(NiMH/NiCd/LiPo/LiFe/Lilon/LiHV/Pb)batteries into any of
the charging ports.
Dual Input and Power Distribution
The input of SKYRC D100 is AC 100-240V and DC 11-18V. In DC mode, the power of
each channel is 100W. Total power is 200W.
In AC mode, it supports power distribution, for example, Channel A-70W, then Channel B-
30W, the total power is 100W.
Optimized Operating Software
SKYRC D100 features the so-called AUTO function that set the feeding current during the
process of charging or discharging. Especially for lithium batteries, it can prevent the
overcharging which may lead to an explosion due to the user's fault. It can disconnect the
circuit automatically and alarm once detecting any malfunction. All the programs of this
product were controlled through two way linkage and communication, to achieve the
maximum safety and minimize the trouble. All the settings can be configured by users!
SPECIAL FEATURES