SkyRC D100 Charger - Manual (Page 25)

The free “Charge Master” software gives you unparalleled ability to operate the charger
through the computer. You can monitor pack voltage, cell voltage and other data during
the charging, view charge date in real-time graphs. And you can initiate, control charging
and update firmware from “Charge Master”.
In order to connect the charger to the computer and use the “Charge Master”, you are
required to use a USB cable which is not included in this package. The cable must be
terminated on one end with “A” plug and the opposite end is terminated with “micro-B”
plug which can connect to charger directly.
You can control, monitor, operate and upgrade two channels with one computer.
The “Charge Master” can be download from www.skyrc.com.
USING THE CHARGE CONTROL SOFTWARE
“CHARGE MASTER”
THE SET CONTAINS
1. SKYRC D100 Charger
2. XH Adaptor X 2
3. Charging Cable X 2
4. Banana connectors with XT60 connector Charging Cable X 2
5. Power Cord
1 2
3 4 5
23 · D100