SkyRC D100 Charger - Manual (Page 3)

Congratulations on your choice of SKYRC D100 AC/DC Dual Balance
Charger/Discharger. This unit is simple to use, but the operation of a
sophisticated automatic charger such as SKYRC D100 does require some
knowledge on the part of the user. These operating instructions are
designed to ensure that you quickly become familiar with its functions. It is
therefore important that you read right through the Operating Instructions,
Warning and Safety Notes before you attempt to use your new charger for
the first time. We hope you have many years of pleasure and success with
your new battery charger.
SKYRC D100 is a twin-channel charger with two independent circuits which
can charge two different kinds of batteries simultaneously. It also supports
power distribution in AC mode to get max charging power to shorten
charging time. What’s more, users could set the terminal voltage by
themselves and connect it to PC for PC control and firmware upgrade.
Besides that, users could also use it as Lithium Battery Meter and Battery
Internal Resistance Meter. There are Automatic Charging Current Limit,
Capacity Limit, Temperature Threshold and Processing Time Limit which
makes the charger safe to use.
SKYRC D100 is a high-performance, micro processor control
charge/discharge station with battery management suitable for use with all
current battery types, with integral equalizer for six-cell Lithium-Polymer
(LiPo), Lithium iron phosphate(LiFe) and Lithium-Ion (LiIon) batteries;
maximum 10A charge current and maximum 100W charge power. The
additional LiHV mode is able to charge the new generation of LiPo batteries
with an end of charge voltage 4.35 V.
Please BE SURE to read these INSTRUCTIONS, WARNING and SAFETY
NOTES before you use the charger for the first time.
It can be dangerous to mis-handle batteries and battery chargers, as there
is always a risk of batteries catching fire and exploding.
INTRODUCTION
01 · D100