Sioux Tools SRW07-50 - Manual (Page 3)

Form Z812 3 Date 2013November19/B
HOSE AND HOSE CONNECTIONS
The air supply hose recommended is 3/8" (10mm) I.D. If an extension hose is necessary, use 1/2" (13mm) ID hose with couplings not less than 3/8"
(10mm) I.D.
LUBRICATION
All models may operate without airline lubrication. However, operating the tool without airline lubrication may reduce tool performance and vane life.
If an airline lubrication is not used, it is recommended that the tool be oiled daily before use to improve performance. Add 2-4 drops of air motor oil and
run the tool for 10-20 seconds to distribute oil through the tool.
For maximum performance and tool life, an air line lubricator, set to deliver 2 drops per minute, is recommended. SIOUX No. 288 Air Motor Oil is
recommended.
For Ratchet Mechanism Lubrication
Lubricate the ratchet head assembly with 2 shots of SIOUX #1232A grease every 8 working hours.
Inject grease through the flush-type fitting on the selector knob until fresh grease becomes visible on both sides of the ratchet head.
MAINTENANCE
Water, dust and other airline contaminants can cause rust and vane sticking. For long periods between tool use, flush the tool with a few drops of oil
and run for 10 seconds. This will help remove contaminants and reduce the formation of rust.
OPERATION
Speed of the tool may be adjusted by turning the regulator, which is located opposite the throttle lever.
WARNING
Disconnect tool from air supply before installing or removing sockets or making any adjustments
NOISE AND VIBRATION READINGS
Catalog
Number
Noise* (Tested in accordance with
ISO Standard 15744)
Vibration* (Tested in accordance with
ISO Standard 28927)
*Sound Pressure (dBA) *Sound Power (dBA) Uncertainty (dBA) *Vibration m/s^2 Uncertainty m/s^2
SRW03S-25 84.0 95.6 3.0 2.5 0.4
SRW03S-38 84.0 95.6 3.0 2.5 0.4
SRW07-38 91.4 103.0 3.0 9.04 1.89
SRW07-50 91.4 103.0 3.0 9.04 1.89