Simaudio Neo 220i Integrated Amplifier - Manual (Page 7)

220i Integrated Amplifier
____________________________________________________________________________________
7
Unpacking
The Nēo 220i integrated amplifier should be removed from its box with care.
The following accessories should be included inside the box with your integrated amplifier:
9 AC power cable
9 ‘CRM-2’ remote control with two ‘AA’ batteries
9 This owner’s manual
9 Warranty and product registration information (USA and Canada only)
Once the Nēo 220i is unpacked, inspect it
thoroughly and report any damage to your dealer
immediately. We suggest that you keep all of the
original packaging, storing it in a safe, dry place in
case you’re required to transport this product. The
customized packaging is specially designed to
protect the 220i from any potential damage during
transit.
Please write the serial number of your new Simaudio Nēo 220i in the space provided below for future reference.
Serial No.: ________________
Installation & Placement
The Nēo 220i Integrated Amplifier requires
reasonable ventilation to maintain an optimum and
consistent operating temperature, especially since it
will radiate heat when driven hard. Consequently, it
should be placed in a location with empty space
around it for proper heat dissipation. You should
never place another component on top of this
integrated amplifier. As well, it should be placed on
a solid level surface. You should avoid placing it near
a heat source or inside a closed cabinet that is not
well ventilated as this could compromise the
amplifier’s performance and reliability. The 220i
uses a large toroidal transformer in its power supply;
even though it is well shielded, you should not place
this integrated amplifier too close to source
components sensitive to EMI, such as turntables,
phono preamplifiers and CD Players. Finally, y
ou
should never place another component directly on
top of this integrated amplifier.