Simaudio Neo 220i Integrated Amplifier - Manual (Page 13)

220i Integrated Amplifier
____________________________________________________________________________________
13
Specifications
Configuration ................................................ Stereo
Power Supply Transformer .............................. 250VA
Power Supply Capacitance ............................. 20,000µF
Class Of Operation - Amplifier ......................... Class A/B
Single-ended inputs ........................................ 5 (RCA)
Mini-jack input ............................................... 1 (1/8”)
Input Sensitivity ............................................ 370mV – 3.0V RMS
Input Impedance .......................................... 11,000
Ω
Preamplifier output ........................................ 1 (RCA)
Headphone output........................................... 1 ( 1/4” Strereo TRS)
Output Device Type - Amplifier ........................ Bipolar
Output Power @ 8
Ω ....................................... 40 Watts per channel
Output Power @ 4 Ω ....................................... 80 Watts per channel
Output Impedance ......................................... 0.04 Ω
Damping Factor ............................................. > 200
Gain .............................................................. 34dB
Dynamic Headroom ........................................ 3dB
Signal-to-noise Ratio ..................................... 101dB @ full power
Maximum Output Voltage ................................ 20 Volts
Slew Rate ...................................................... 20V/µs
Maximum Current – Peak ............................... 14 amperes
Maximum Current – Continuous ...................... 8 amperes
Frequency Response ...................................... 10Hz - 100kHz +0/-3dB
Crosstalk @ 1kHz .......................................... -78dB
Intermodulation Distortion ............................. < 0.07%
THD (20Hz - 20kHz @ 1 watt) ....................... < 0.015%
THD (20Hz - 20kHz @ 50 watts) .................... < 0.03%
Remote Control ............................................. Full-Function (CRM-2)
AC Power Requirements ................................. 120V / 60Hz or 240V / 50Hz
Shipping Weight ............................................ 20 lbs / 8 Kgs
Dimensions (W x H x D, inches) ..................... 16.9 x 3.5 x 14.4
NOTE: If you require the RS-232 codes for your Nēo 220i, please visit the "Contact Us" page
and complete the "Information request" form on our website at www.simaudio.com.
Fuse Replacement:
For the 120V version use a 4A fast blow (3AG size).
For the 220 - 240V version use a 2A fast blow (3AG size).