beautypg.com

Ruark Audio R2 (mk3) User Manual

Page 9

background image

EN-9

EN

DA

DE

FR

IT

ES

NL

NO

1. Fit

aerial

Connect the aerial to the socket on the back of your
R2 and tighten the nut with the spanner. If you do not
tighten the nut, the aerial may come lose when moving
the aerial.

Place your R2 on a suitable shelf or table and fully
extend the aerial to ensure you get the best possible
radio reception.

2. Fit the plug to the AC power
adapter

Fit the correct plug for your region to the mains power
supply. When you fi t the plug adapter, it will “click” into
place.

3. Connect the DC cable

Connect the DC cable from the power supply to the DC
power socket (14V 2.0A) on the back of your R2.

4. Connect to AC mains

Plug the AC power adapter into a mains power socket.

5. Turn

on

Press to turn the radio on.

6. Setup

wizard

When you turn on your R2 for the fi rst time, setup wizard
starts automatically. Follow the on-screen guide to
confi gure the clock and connect to your Wi-Fi network.

To confi gure a setting, rotate the CONTROL KNOB
until your preferred choice is highlighted, then press the
knob to select it.

To start the setup wizard, rotate the CONTROL KNOB
to highlight YES and then press the knob to select. If
you choose NO, you can then choose to run the wizard
next time your R2 is turned on, and then it starts without
confi guring time/date and network settings.

7. Time

format

Choose 12 or 24 hour clock display.