Ruark Audio R2 (mk3) - Manual (Page 17)

EN-17
EN
DA
DE
FR
IT
ES
NL
NO
Setting an alarm
An active alarm is indicated by the alarm icon (41) and
when it sounds, the icon fl ashes.
Press ALARM and select alarm 1 or alarm 2 using the
CONTROL KNOB.
Using the CONTROL KNOB highlight the option you
wish to change and press the knob.
Choose when the alarm will sound (off, daily, once,
weekends or weekdays), set the time and then choose
to have the alarm play a radio station or sound a tone
and fi nally choose the volume. Finally, select save to
save the alarm and exit the set up menu.
NOTE: it is not possible to use a Bluetooth source, USB
or network music server for the alarm.
Snooze
Press the CONTROL KNOB to temporarily silence a
sounding alarm, press it again to increase the snooze
period (5, 10, 15 or 30 minutes).
To cancel an alarm that is sounding or in snooze mode,
press and hold the CONTROL KNOB for two seconds
or press ALARM.
Sleep timer
To set the time after which your R2 will automatically
switch to standby, press SLEEP for two seconds.
Press the CONTROL KNOB, then rotate it to choose the
delay in minutes (Off, 15, 30, 45, 60, 90) and fi nally press
the knob to confi rm your selection. The display then
dims to standby brightness, returns to the Now-playing
screen and displays the sleep icon (42).
Alarms, snooze and sleep
Alarms can also be set in standby