Midi dump/load – Rocktron MultiValve User Manual

Page 57

MIDI Dump/Load

Any or all of the MultiValve presets may be dumped to a sequencer or another MultiValve via system exclusive

messages. The information exchanged when performing a MIDI Dump consists of parameter values, title characters
and controller assignment information. When dumping a single preset into another MultiValve, the dumped preset
may be loaded into any preset location on the receiving MultiValve.

To dump a single MultiValve preset into another MultiValve

Operating the MultiValve

Connect a standard MIDI cable from the MIDI OUT of the transmitting MultiValve to the
MIDI IN on the receiving MultiValve.

Step 1

IMPORTANT:

Do not allow a looping connection from the MIDI OUT/THRU of the receiving
MultiValve back to the MIDI IN of the transmitting MultiValve.

Step 2

Turn the FUNCTION SELECT controls on both the transmitting and receiving MultiValves
until "MIDI DUMP/LOAD" is displayed on each.

MIDI DUMP/LOAD

Step 3

Turn the PARAMETER SELECT control on each unit one step clockwise to "PR DUMP/
LOAD".

1 PR DUMP/LOAD

RECEIVING MULTIVALVE

TRANSMITTING MULTIVALVE