Front panel features...continued – Rocktron VersaTune User Manual

Page 6

MUTE BUTTON - Use this button to MUTE the output for silent tuning. When MUTE is active, the MUTE

LED (Point 4) will be “ON” or “LIT”. This button mutes both Output 1 and Output 2. MUTE LED - This

LED works in conjunction with the MUTE BUTTON. When the input is MUTED, the MUTE LED will be

Lit. No sound will be passed through either output. This LED also works in conjunction with the MUTE

FTSW (footswitch) jack on the back panel.

UP BUTTON - This button is used in conjunction with the “TUNINGS WINDOW” - see point 14. Press this

button to move UP through the lists of tunings.

DOWN BUTTON - This button is used in conjunction with the “TUNINGS WINDOW” - see point 14. Press

this button to move DOWN through the lists of tunings.

NOTE DISPLAY - This window will show you the note that is being played.

SHARP INDICATOR - This indicator (#) will “light” if the note being played is “SHARP”

TUNINGS WINDOW - This window shows you over a hundred different types of tunings and is used as a

guide to help you tune your instrument to the desired tuning. This window is used in conjunction with the UP

Button (point 10) and the DOWN Button (Point 11) to select the desired tuning you would like displayed in

the window. For more information see section called “TUNINGS WINDOW” later in this manual.

ON/OFF SWITCH - This is the power “ON/OFF” switch for the VersaTune.

TUNING LEDS SHARP/FLAT LEDS - When the note being played is IN TUNE the GREEN LED in the

center of the LED panel will light. The RED LEDs show you if your note is Sharp or Flat. RED LEDs to the

right of the GREEN LED are sharp and the string should be tuned down. The farther right the LED is away

from the GREEN IN TUNE LED the more the note is SHARP. RED LEDs to the left of the GREEN LED are

flat and the string should be tuned up. The farther left the LED is away from the GREEN IN TUNE LED the

more the note is flat.

In PRECISION MODE the LEDs are opposite. The IN TUNE LED will be RED and the out of tune LEDs

are GREEN. The GREEN LEDs show you if your note is Sharp or Flat. GREEN LEDs to the right of the

RED LED are sharp and the string should be tuned down. The farther right the LED is away from the RED

IN TUNE LED the more the note is SHARP. GREEN LEDs to the left of the RED LED are flat and the string

should be tuned up. The farther left the LED is away from the RED IN TUNE LED the more the note is flat.

Front Panel Features...continued...