Rocktron VersaTune - Manual (Page 2)

Your Rocktron VersaTune has been designed to comply with the following Standards and Directives as set forth by
the European Union:
Council Directive(s): 89/336/EEC, 73/23/EEC, 76/769/EC, 1994/62/EC, 2000/
53/EC, 2002/95/EC
Standard(s): EN55022, EN50082-1, EN60065
This means that this product has been designed to meet stringent guidelines on how much RF energy it can emit,
and that it should be immune from other sources of interference when properly used. Improper use of this equipment
could result in increased RF emissions, which may or may not interfere with other electronic products.
To insure against this possibility, always use good shielded cables for all audio input and output connections. This will
help insure compliance with the Directive(s).
Inputs
Outputs
Front Panel Tuning Range
Calibration Range
Mute Switches
Other Switches
Size
Weight
Input Impedance
Output Impedance
Power Consumption
Tunings List
Two On Front Panel
Two on Back Panel
Two on Back Panel
+-50 Cents
436hz - 445hz
Manual Switch Front Panel
Optional Footswitch Jack on back panel (Momentary footswitch)
Input Selector
Precision Mode
Note Selector
Tuning Window Up
Tuning Window Down
482mm x 125mm x 45mm
19” x 5” x 1.75”
2.25 kg
5lbs
≥1.5MΩ
≤1KΩ
≤1W
126 Tuning Variations
SPECIFICATIONS