Rigel Systems Moonlite - Manual

Moonlite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: Red LEDs light
dimly.
How to change the battery:
1) Unscrew thumb knob at bottom of
battery cover.
2) Remove battery cover and note
sealing ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium
for long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until
tight.
How to attach lanyard: Stretch loop
over thumb knob.
Moonlite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: Red LEDs light
dimly.
How to change the battery:
1) Unscrew thumb knob at bottom of
battery cover.
2) Remove battery cover and note
sealing ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium
for long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until
tight.
How to attach lanyard: Stretch loop
over thumb knob.
Moonlite
Operation: Push thumbwheel forward
or backward to light, center position is
off.
Low battery Indication:: Red LEDs light
dimly.
How to change the battery:
1) Unscrew thumb knob at bottom of
battery cover.
2) Remove battery cover and note
sealing ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium
for long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until
tight.
How to attach lanyard: Stretch loop
over thumb knob.
Moonlite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: Red LEDs light
dimly.
How to change the battery:
1) Unscrew thumb knob at bottom of
battery cover.
2) Remove battery cover and note
sealing ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium
for long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until
tight.
How to attach lanyard: Stretch loop
over thumb knob.
Moonlite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: Red LEDs light
dimly.
How to change the battery:
1) Unscrew thumb knob at bottom of
battery cover.
2) Remove battery cover and note
sealing ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium
for long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until
tight.
How to attach lanyard: Stretch loop
over thumb knob.
Moonlite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: Red LEDs light
dimly.
How to change the battery:
1) Unscrew thumb knob at bottom of
battery cover.
2) Remove battery cover and note
sealing ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium
for long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until
tight.
How to attach lanyard: Stretch loop
over thumb knob.
Moonlite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: Red LEDs light
dimly.
How to change the battery:
1) Unscrew thumb knob at bottom of
battery cover.
2) Remove battery cover and note
sealing ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium
for long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until
tight.
How to attach lanyard: Stretch loop
over thumb knob.
Moonlite
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: Red LEDs light
dimly.
How to change the battery:
1) Unscrew thumb knob at bottom of
battery cover.
2) Remove battery cover and note
sealing ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium
for long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until
tight.
How to attach lanyard: Stretch loop
over thumb knob.