REFCO DIGIMON4 - Manual (Page 6)

English Instruction Manual DIGIMON-SE / DIGIMON4
4
Scope of delivery
Information about the various models and variations of our products can be found in
the REFCO catalogue or at www.refcoswiss.com
Transport
The manifolds are delivered from the factory in a plastic box, with or without filling
hoses. Manifolds are high-grade instruments and should always be transported and
stored in a box.
Important note:
Remove refrigerants from the manifold and the hoses after use.
The hose connectors hanging freely from the manifold (screw joints / system side) can
be screwed onto the Y-connectors and to the central T-piece, when not in use. This
serves to protect the thread from contamination and damage.
Technical description
The DIGIMON can be used with the following refrigerants:
R11, R113, R114, R12, R123, R124, R13, R134a, R13B1, R22, R227, R23, R290, R32
R401A(Liq), R401A(Vap), R401B(Liq), R401B(Vap), R402A(Liq), R402A(Vap),
R402B(Liq), R402B(Vap), R403B(Liq), R403B(Vap), R404A, R406A (Liq), R406A(Vap),
R407A(Liq), R407A(Vap), R407C(Liq), R407C(Vap), R407F(Liq), R407F(Vap),
R408A(Liq), R408A(Vap), R409A(Liq), R409A(Vap), R410A, R413A(Liq), R413A(Vap),
R414B(Liq), R414B(Vap), R416A, R417A(Liq), R417A(Vap), R420A, R422A(Liq),
R422A(Vap), R422B(Liq), R422B(Vap), R422C(Liq), R422C(Vap), R422D(Liq),
R422D(Vap), R427A(Liq), R427A(Vap), R437A, R438A(Liq), R438A(Vap), R500,
R502, R503, R507, R508A, R508B, R600A, R744, R1234yf
(Liq) = liquid / bubble point, (Vap) = vapour / dew point