REFCO DIGIMON4 - Manual (Page 5)

Instruction Manual DIGIMON-SE / DIGIMON4 English
3
Important safety notice
Before working with the manifold, please read the instruction manual
carefully. This manual provides important information regarding the smooth
operation, maintenance and disposal of the manifold.
Purpose and use
The manifold has been developed for measuring and adjusting pressure and
temperature in both mobile and stationary refrigeration equipment.
The manifold must not be used for anything other than the above-stated
purposes.
The manifold must not be used with pressures higher than 60bar / 870psi /
6000kPa / 6MPa.
Under no circumstances should the manifold be used as a pressure regulator,
especially not when using nitrogen N
2
.
The manifold must not be used with the refrigerant ammonia (NH
3
/ R717).
The manifold should not be exposed to rain or used in damp or wet
environments.
Protective goggles and gloves must always be worn when using the manifold.
REFCO products have been specially designed and manufactured for use by
trained refrigeration and air-conditioning service engineers only. Due to the high
pressures and the physical and chemical gases used in refrigeration systems, REFCO
cannot be held liable or responsible for any accidents, injuries or deaths arising during
use of the manifold. REFCO explicitly states that their products must only be sold to
professionally trained experts.