RAVE Sports Bongo 20 Bouncer Water Park - Manual (Page 9)

Feed the quick link onto the loops of the ladder connection
plate & turn the nut until closed and the link is secured.
Ensure webbing loop is lying flat across the entire width of
the quick link as shown. Repeat for other strap.
Step 5
Attach an anchor line (not included) to the ring in the center of
the rope harness under the Bongo.
Adjust length of anchor line so that it is approximately 1-2 ft.
longer than the depth of the water. The RAVE Sports anchor
bungee (sold separately) will provide 2 ft. of stretch to absorb
waves and any vertical bouncing motion. To help prevent flipping
of your product in high wind conditions, do not exceed 3 ft. of
slack in the anchor line.
NOTE: More slack will improve anchor holding
performance, but too much slack may be sufficient line to
allow the Bongo to stand on edge and flip over in strong
winds. For best results, maximize your anchor holding
power via more weight or a different type of anchor and
minimize your anchor line length.
Attach anchor
line here
Bongo15 Bongo20
9