RAVE Sports Bongo 20 Bouncer Water Park - Manual (Page 7)

NOTE: This inflation adaptor will
automatically open the valve when
inserted and will close the valve
when removed. You do not need
to manually open/close the valve
when using this special adaptor.
If you will be using another inflation
device with a larger nozzle, use the 1 ¼” diameter coupler
(included) between the valve adaptor and the hose of your
inflator. Make sure the hose is attached to the blower port of
the vacuum for inflation. Insert the adapter into the air valve
and lock into place by turning clockwise.
Inflate until the tube is firm and resistant to pressure. Your
fist should create only a slight depression when pushed
against the tube and the surface should be stretched taut in
all directions. Replace cap to ensure an air tight seal.
C A U T I O N
DO NOT OVER-INFLATE.
Do not exceed 2 PSI if filling with compressed air.
Excessive pressure can cause the tube to rupture with
potentially damaging force to eyes, ears, skin and limbs.
Use of an air compressor or over-inflation can rupture
the tube beyond repair, thus voiding the warranty.
!!
Adaptor Coupler
7