RAVE Sports Bongo 20 Bouncer Water Park - Manual (Page 6)

• Use the Bongo only under mature, knowledgeable adult
supervision.
• Not recommended for children under the age of six.
• DO NOT OVER-INFLATE. Over inflation can cause seam
rupture.
Inflating Your Bongo
Step 1
Lay the Bongo on a flat surface. Make sure there are no sharp
objects under the product that might puncture the tube.
Step 2
Locate the valve of the Bongo and unscrew the cap. We
recommend using the High Speed Inflator/Deflator from
RAVE Sports to inflate and deflate. (Part #01083)
A special inflation adaptor is included
with this product. If you are using the
RAVE Sports High Speed Inflator, simply
lock the adaptor onto the end of the
inflation hose and insert into the valve
body. Turn ¼ turn to lock in place.
OPEN
CLOSE
To lock open valve, depress the stem
and rotate ¼ turn clockwise. To close
valve, depress the stem and rotate ¼
turn counter-clockwise. The valve stem
should be in the depressed position
while inflating. Replace cap on valve
after inflation to ensure air tight seal.
6