RAVE Sports Bongo 20 Bouncer Water Park - Manual (Page 11)

::::::::::::::::::::::: Important :::::::::::::::::::::::
Rodents like muskrats may be attracted to the PVC vinyl of your product.
When your product is on the water, maintaining full air pressure during
periods of non-use will discourage them from chewing the vinyl.
Another way to ease the problem of nuisance rodents is to remove the
temptation by taking the product out of the water at night. Another
option is to make the whole area unattractive to rodents by changing
the environment, making the area less hospitable for rodents.
Removing any food source from the shoreline can also be a good
deterrent. Check with your local DNR for additional guidance or possible
restrictions.
Repairs
For large holes, tears or seam failures, contact RAVE Sports
Customer Service at 1-800-659-0790. Additional patches can be
purchased at www.ravesports.com.
For minor holes or tears:
 Inflate the product and locate the leak by spraying the
tube with mild soapy water.
 Determine the hole size and cut a patch 1-2 inches wider
than the hole. Make sure all corners of the patch are
rounded.
 Deflate the product and clean the patch and area around
the hole with rubbing alcohol. Let dry completely.
 READ AND UNDERSTAND THE WARNINGS ON THE GLUE
CONTAINER.
 Apply glue to the patch and the area around the hole. Let
the glue dry until it is tacky to the touch.
11