RAVE Sports Classic Aqua Jump 25' Water Park - Manual (Page 8)

7
Liability
While every attempt is made to embody the highest degree of
protection in all equipment, we cannot guarantee freedom from
injury. The user assumes all risk of injury due to use. All
merchandise is sold on this condition, which no representative
of the company can waiver or change.
Assembling Your Aqua Jump
Unpack the contents.
Lay the Aqua Jump on a flat surface. Make sure there are no
sharp objects under the product that might puncture the tube.
Inflate the tube
Locate the valve of the Aqua Jump and unscrew the cap.
Note: The AJ25’ has two valves to speed inflation/deflation.
We recommend using the High Speed Inflator/Deflator from
RAVE Sports to inflate and deflate (Part # 01083).
A special inflation adaptor is included with
this product. If you are using the RAVE
Sports High Speed Inflator (P/N 01083),
simply lock the adaptor onto the end of the
inflation hose and insert into the valve body.
Turn ¼ turn to lock in place.
OPEN
CLOSE
To lock open valve, depress stem and
rotate ¼ turn clockwise. To close
valve, depress stem and rotate ¼ turn
counter-clockwise. The valve stem
should be in the depressed position
while inflating. Replace cap on valve
after inflation to ensure air tight seal.