RAVE Sports Classic Aqua Jump 25' Water Park - Manual (Page 10)

9
It is normal for the air pressure within the tube to fluctuate
depending on air and water temperatures. It may be necessary
to increase or decrease the air pressure in your product
accordingly. To avoid damage on extremely hot days it may
be necessary to check and release the air pressure from your
product throughout the day. A fully inflated product on warm
land will lose some of its pressure when placed in cold water.
Assemble the trampoline frame.
Lay the trampoline frame sections in a circle with the
tapered ends next to the non-tapered ends, and the spring
holes facing up.
Slip a vinyl sleeve on each section before connecting them.
Slide the ends of the sections together to form a complete
circle.
Inserting from the top of the frame
through to the bottom, install a bolt
through each intersection. Add washer
and nut to bolt. Tighten firmly. Slide
the vinyl sleeves over each
intersection to protect inflatable tube
from abrasion.
Attach the frame to the tube.
With another person helping, place the trampoline frame onto
the inflated tube.
IMPORTANT! Align the frame joints as close as possible to
the junctions of the blue and yellow panels. This placement
prevents the hardware from rubbing against the tube.