RAVE Sports Classic Aqua Jump 25' Water Park - Manual (Page 17)

16
Repairs
For large holes, tears or seam failures, contact RAVE Sports at
1-800-659-0790. For minor holes or tears:
 Inflate the product and locate the leak by spraying the tube
with mild soapy water.
 Determine the hole size and cut a patch 1-2 inches wider
than the diameter of the hole. Make sure all corners of the
patch are rounded.
 Deflate the product and clean the patch and area around
the hole with rubbing alcohol. Let dry.
 READ AND UNDERSTAND THE WARNINGS ON THE
GLUE CONTAINER.
 Apply glue to the patch and the area around the hole. Let
the glue dry until it is tacky to the touch. (Approximately 1-2
minutes.)
 Lay the product on a flat, hard surface and apply the patch.
Working from the center to the outer edge, rub out any air
bubbles between the patch and the product.
 Let the patch dry for 24 hours before attempting to inflate
the product.