RAVE Sports Aqua Jump Eclipse 200 Water Park - Manual (Page 10)

ensures maximum anchor holding power and prevents flipping in
windy conditions.
NOTE: The AJ120 does not have a harness.
The anchor line will be connected directly to the ring located
opposite the ladder on the inside of the tube.
Attach Jump Surface
With the warning labels of the
jump mat facing up, connect one
pair of springs between the mat
and tube in each corner. Make
sure open ends of springs are
facing downward.
Note: Two springs attach to the
same W-shape corner ring of the
jump surface and fan outward to
connect to the first ring on either side of the tube corner. Repeat for all
corners prior to adding each side springs.
Continue to add springs, working from
the corners to the center of each side.
Note: it is best to add springs
uniformly around every side of the
tube rather than fully loading one
side. Working in a circular motion
around the tube, add 2 springs per
side then go on to the next section
and do the same. Eventually, you will have all springs attached.
9