RODE Microphones NT3 - Manual (Page 7)

- 7 -
To fi t the battery:
1. Unscrew the lower section of the body to reveal the
battery cavity.
Unscrewing NT3 body
2. Flip open the battery clip so that it doesn’t
interfere with loading the battery.
3. Insert the battery into the cavity, inserting the
bottom fi rst. Take note of the plus and minus
symbol on the fl oor of the battery cavity to ensure
the battery is positioned the correct way.
Inserting the battery
4. Push the battery into place so that it is parallel with
the top of the cavity. Secure the battery in place by
fl ipping the battery clip over so that it sits on the
battery.
5. Reassemble the body, screwing lower section
fi rmly together with the upper section.