RODE Microphones NT3 - Manual (Page 3)

- 3 -
Specifi cations
Acoustic
Principle: Externally polarised 19mm (¾”)
condenser
Active
Electronics: JFET impedance converter
with bipolar output buffer
Directional
Pattern: Cardioid
(see graph)
Frequency
Range: 20Hz ~ 20,000Hz
(see graph)
Output
Impedence: 200Ω
Sensitivity: -39dB re 1V/Pa @ 1kHz
(12mV/Pa @ 94dB SPL)
±2dB @ 1kHz
Equivalent Noise: <16dBA SPL
(per IEC651)
Maximum
Output: +9.5dBu
(@ 1kHz, 1% THD into 1kΩ)
Dynamic Range: >123dB (per IEC651)
Maximum SPL: >140dB
(@ 1kHz, 1% THD into 1kΩ)
Signal/Noise: >77dB SPL
(@ 1kHz, rel 1Pa per IEC651)
Power
Requirement: 8mA @ P48 (20-60v)
7mA @ P24 (12-30v)
1.4mA @ P12 (11-26v)
1.2mA @ 9V (battery)
Output
Connection: 3-pin XLR
Net Weight: 371g
Dimensions: 270 x 130 x 50mm