RODE Microphones NT3 - Manual (Page 11)

- 11 -
• After use the NT3 should be removed from its
stand mount, wiped with a dry, soft cloth and
placed in its protective zip pouch with the supplied
moisture-absorbent crystals.
• Be sure to place the moisture-absorbent crystals
(supplied) at the head of the microphone(s), so as
to absorb any moisture present.
Eventually this pack of crystals will need to be
dried. This is indicated by the crystals turning pink
in colour.
They can easily be re-used by placing them in an
oven at 100 - 150 degrees celsius for approximately
ten minutes. The crystals will operate effectively
again once they have turned blue.
Storage