Dynex DX-HTIB - Manual (Page 8)

8
DX-HTIB
3 CD/DVD Press to select the CD/DVD source.
4 AM/FM Press to select the radio source.
5 MO/ST Press to toggle between mono and stereo radio signals.
6 Numbers Press to enter channel numbers or the parental control password.
7 SEARCH In playback mode, press this button once and the TV screen will display a search
menu. Press a number button to enter the time/track you want, then press
PLAY/ENTER to confirm.
8 SETUP Press to open the DVD General Setup Page (menu).
9 , , , and
arrow keys
Press to navigate in the on-screen DVD menus.
10 DISPLAY Press to cycle through information about the DVD/CD, including Single Elapsed,
TR (Track Remain), Total Elapsed, DR (Directory Remain), Title Elapsed, Display
off.
11 TONE Press to cycle through the 5.1 speakers (5.1 CH output should be ON) to set the
tone. Choices include FL (front left), FR (front right), CEN (center), SL (surround
left), SR (surround right), and SUB (subwoofer). After you select the speaker, press
VOL+/– to adjust the bass/treble tone of the speaker.
12 TUNE+/TUNE– Press to tune the radio up or down.
13 AUDIO In DVD mode, press this button to change the audio language.
In CD mode, press this button to select Mono L, Mono R, Mix-mono, or Stereo.
Note: When you press this button repeatedly, you must wait approximately three
seconds.
14 SUBTITLE Press to turn on DVD sub-titles and select the subtitle language. Press this button
and the screen displays "SUBTITLE 01/XX XXXXX." "01" indicates the ordinal number
of this language, "XX" indicates total number of languages available, and "XXXXXX"
is the language. (The number of languages available depends on the DVD).
15 PLAY/PAUSE Press to begin playback of a CD or DVD. Press again to pause playback.
16 STOP Press to stop CD or DVD playback.
17 (fast reverse) Press to fast reverse a CD or DVD.
18 (fast forward) Press to fast forward a CD or DVD.
19 OPEN/CLOSE Press to open/close the disc tray.
20 AUX1 Press to select AUX1 as the signal source.
21 AUX2 Press to select AUX2 as the signal source.
22 RESOLUTION Press repeatedly to cycle through the available resolution modes. Choices include
1080I, 1080P, 480I, 480P, or 720P.
Note: Setting a resolution that your TV cannot support could result in an unstable
picture or a loss of picture. Check your TV manual for more information.
# Button Description
DX-HTIB_10-0823_MAN_ENG_V3.fm Page 8 Thursday, July 29, 2010 2:57 PM