Dynex DX-HTIB - Manual (Page 16)

16
DX-HTIB
• To view a specific picture, input its number using the number buttons or press
or .
• To repeat a picture, press the REPEAT button.
• While playing, press
STOP or DVD MENU button to return to the main menu.
• You can also use the options such as Fast forward/rewind, Pause, and so on.
Notes:
• Your JPEG picture may be distorted at the edge of some TVs. This is caused by the TV
and not your player.
• Your player can play digital JPEG-file photo discs and also supports photos created by
Photoshop.
Using the radio
To use the radio:
1 Press STANDBY/ON to turn on the player.
2 Press AM/FM to switch the player to radio mode and toggle between the AM and FM
bands.
3 To select a station:
• Press TUNE+ or TUNE– to adjust the frequency up or down a step (FM changes in
0.2 MHz steps and AM in 10 KHz steps).
4 To save a radio station as a preset.
• Press the TUNE+/TUNE- button to tune to the desired frequency.
• Press the MEMORY button once.
• Press the Number buttons (0~9) to enter the station number that you want to
allocate.
Note: Press the 0 and 1 buttons for the Station 1, (or press 1, then press PLAY/ENTER ). Press
the
1 and 0 buttons for Station 10.
• Repeat the above steps to save up to 20 radio stations.
• When you manually tune to an FM station with a weak signal, press the MO/ST
button on the remote control to switch from stereo mode to mono mode to reduce
the background noise.
Note: Stereo is not available in AM mode.
5 To select a preset station:
• Press the PRESET+/PRESET- or Number buttons to select a stored radio station.
6 To select Mono or Stereo while in FM mode, press the MO/ST button.When you select
stereo, the display shows a stereo signal. If the signal is not strong enough, you cannot
select Stereo.
Note: To improve radio reception, move the antenna to find the strongest signal for each
station.
DX-HTIB_10-0823_MAN_ENG_V3.fm Page 16 Thursday, July 29, 2010 2:57 PM