Dynex DX-HTIB - Manual (Page 21)

Home Theater System
21
Maintaining
Cleaning your player
Clean the outside of your player with a clean cloth, slightly dampened with water.
Caution: Do not use liquid cleaners or aerosol cleaners because they may damage your
player.
No picture on the TV • Make sure that your player is connected correctly.
• Make sure that the TV is set to video mode and that the
input source is selected correctly.
• Make sure that the scanning mode on the player
matches the TV.
Picture is distorted. • During fast-forwarding or fast-reversing, distortion is
normal.
• The DVD may be damaged. Try another DVD.
Remote control does not work. • Make sure that the battery is fresh.
• Make sure that nothing is blocking the IR sensor.
• Make sure that you point the remote directly at the IR
sensor and that you are within 10 feet of the IR sensor.
Disc does not play. • Make sure that the disc is inserted with the label side
up.
• Make sure that the disc is compatible with your player.
Your player can play DVDs and audio CDs.
Play starts, then stops immediately. • Make sure that the region code for a DVD matches the
region code for your player. Your player’s region code is
1. The DVD’s region code is on the DVD or the DVD
packaging.
• Make sure that the disc is not dirty.
• If condensation has formed inside your player, let your
player dry out.
Problem Solution
DX-HTIB_10-0823_MAN_ENG_V3.fm Page 21 Thursday, July 29, 2010 2:57 PM