Qsonix Qsonix - Manual (Page 41)

41
To Auto Configure your network, simply tap the Auto
Configure button and your Qsonix system will do all
the work.
If you choose to configure the system manually, read the following steps first, gather the information required for
manual configuration (indicated in bold italic in the steps), then follow the steps to complete configuration.
1. Using the keypad on the touch screen, enter
the IP address you would like to assign to
your Qsonix system..
2. Enter the Default Gateway for your network
in the space provided.
3. Enter the Subnet Mask for your network
information in the space provided.
4. Enter the Primary DNS information in the
space provided.
5. Enter the Secondary DNS information in the
space provided.
6. When all the above information has been
entered, choose Accept or Cancel.
The system will attempt to connect to the internet
and will indicate whether your configuration is
successful.
Setup up your QSONIX on your home network
Using Network Places
Some of the Qsonix system functions allow you to use media and other resources that are located on other devices on
your network, such as music and picture files on stored your PC or other server. Network places is where you set
references to other network locations and devices on your network.