Denon 685 User Manual

Page 44

Surround parameters q

Pro Logic

x and Pro Logic

Mode:

• The Cinema mode is for use with stereo television shows and

all programs encoded in Dolby Surround.

• The Music mode is recommended as the standard mode for

auto sound music systems (no video), and is optional for A/V
systems.

• The Pro Logic mode offers the same robust surround

processing as original Pro Logic in case the source contents is
not of optimum quality.

• The Game mode for playing games.The game mode can only be

used with 2-channel audio sources.
Select one of the modes (“Cinema”, “Music”, “Pro Logic”or
“Game”).

Panorama Control:
This mode extends the front stereo image to include the
surround speakers for an exciting “wraparound” effect with
side wall imaging.
Select “OFF” or “ON”.

Dimension Control:
This control gradually adjust the soundfield either towards the
front or towards the rear.
The control can be set in 7 steps from 0 to 6.

Center Width Control:
This control adjust the center image so it may be heard only
from the center speaker; only from the left/right speakers as a
phantom image; or from all three front speakers to varying
degrees.
The control can be set in 8 steps from 0 to 7.

DTS NEO:6 Mode:
• Cinema

This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as with
6.1-channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and the
reversed phase component to the surround (SL, SR and SB
channels).

• Music

This mode is suited mainly for playing music. The front channel
(FL and FR) signals bypass the decoder and are played directly
so there is no loss of sound quality, and the effect of the
surround signals output from the center (C) and surround (SL,
SR and SB) channels add a natural sense of expansion to the
sound field.

CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been added.

Set the various surround parameters.

• CINEMA EQ setting

OFF

CINEMA EQ OFF

• CENTER IMAGE setting

0.0

C.IMAGE 0.3

0.3

1.0

• DEFAULT setting

YES

Y/N

DEFAULT Y/N

Select “Yes” to reset to the factory defaults.

• TONE DEFEAT setting

OFF

TONE DEF. ON

• SURROUND BACK SPEAKER setting

OFF

SB : ON

ENGLISH

• D. COMP. setting

OFF

LOW

MID

HIGH

D.COMP. OFF

• LFE setting

-10dB

-5dB

0dB

LFE 0dB

NOTE:
This parameter is displayed during DOLBY DIGITAL playback.

Press the ENTER button to finish surround parameter mode.

(Remote control unit)

NOTE:
• When making parameter settings, the display will return to the

regular condition several seconds after the last button was
pressed and the setting will be completed.