Inserting micro sd card, Turning on – PocketBook A 10 User Manual
Page 13
GETTING STARTED
12
NOTE
It’s recommended to charge the battery using the charging device. In
case if you charge the battery from PC, it’s better to keep the Device off, be-
cause power consumption may be more, than charging.
INSERTING MICRO SD CARD
The Device already has 4 GB of internal
storage, but you can extend it by using
micro SD card. Insert it to the slot, like it
shown on a figure, and slightly push until
card will be fixed.
To eject the card, slightly press on its
edge until it will be unfixed, and pull it to get.
ATTENTION!
Before ejecting microSD card either turn the Device off or un-
mount it: go to Settings > Storage settings > Unmount SD card. Otherwise the
data stored on microSD card might be damaged.
TURNING ON
To turn the Device on, press
On/Off button until startup logo
appears. When the Device is ready to operate, the lock screen
appears. The lock screen can be unlocked in two ways: either
by pressing
Menu hardware button on the front panel or by
touching the lock icon on the screen and sliding your finger