Parr Instrument Model A2200E - Manual (Page 7)

Flow Controller
w w w . p a r r i n s t . c o m 7
Fuses
The following are A2200E Controller fuses which are
intended to be field serviceable.
Fuse Rating Part number
Main Fuse(s) Fast acting, 4
Amp, 250VAC 1434E
Main power switch
This switch will cut off power to the controller.
Protective Fuses
Main fuses are mounted on the back panel of the
flow controller. These fast acting, 250VAC, 4 amp
fuses are intended to protect the controller and sup-
ply in case of a fault condition.
Warning:
Unplug unit before servicing. For contin-
ued protection against possible hazard,
replace fuses with same type and rating of
fuse.
Back side
Back View A2200E Flow Controller