ParkZone PKZ3480 - Manual (Page 2)

1 2
An exciting innovation from Horizon Hobby is changing the way people
experience RC flight. New models offered in Ready-To-Fly form have been
desired by experienced fliers, but they have been disappointed with the need
to purchase the additional transmitters included in the RTF boxes. Bind-N-Fly ™
solves this problem. This revolutionary new way to deliver Spektrum ™ DSM2 ™
technology allows pilots to use a compatible transmitter with a growing
number of electric aircraft from Horizon. The new era in RC flight made its
debut with ParkZone’s Vapor ™ , a member of the unique Etomic ™ series of
ultra-micro aircraft. Now the Ember 2 is continuing ParkZone’s Etomic line of
Spektrum DSM2 aircraft.
Many modelers develop a unique comfort level with their own radios, and are
not interested in purchasing another transmitter just to fly a specific plane.
That’s why Bind-N-Fly helps take them to an entirely different level of RC flight.
It also offers consumers everything they want and need in a plane, without the
inclusion of unnecessary components. All they have to do is bind their DSM2
transmitters to the ultra-micro aircraft (including the transmitter utilized by
E-flite’s remarkably popular Blade ® CX2, Blade mCX and ParkZone ® Vapor)
and the fun begins. In no time at all, modelers will be ready to enjoy superb
flight with the Ember 2.
Aside from the transmitters, Bind-N-Fly products are packaged with everything
else needed to get them in the air, including a flight battery and charger (as
well as AA batteries for the charger). An integrated unit that houses the re-
ceiver, ESC and servos makes this groundbreaking completion level possible.
These stylish aircraft make for fun collectibles and, since their prices do not
include transmitters, are more affordably priced than the ready-to-fly versions
that are also available.
Ember ™ 2 BNF
Introduction
Opening up new possibilities for modelers everywhere by allowing owners of
DSM2 transmitters to have their aircraft flying in no time, Bind-N-Fly is truly
the future of RC flight. All DSM2 transmitters are compatible with Bind-N-Fly
aircraft, including:
PKZ3341 Transmitter, 2.4GHz w/Spektrum DSM2 (Vapor/Ember 2)
LP5DSM (E-flite Blade CX2 transmitter)
MLP4DSM (Blade mCX transmitter)
Spektrum DX7
Spektrum DX6i (Blade 400 transmitter)
JRX9303
JR 12X
Spektrum DX5e
Spektrum DSM2 module systems for JR ® and Futaba transmitters.
DX6 is not compatible with Bind-N-Fly aircraft
Not all transmitters available in all territories.
For a full list of compatible transmitters, or to learn more about
Bind-N-Fly, visit: www.bindnfly.com
We at ParkZone are committed to giving you the most enjoyable
flight experience possible. In order to have a safe and successful flight, we
ask that you do not fly until you have read these instructions thoroughly.
Your Ember 2 features the latest in ultra sub-micro technology,
including a 2.4GHz DSM2 fully proportional 3–channel receiver board with full
control of throttle, rudder and elevator. Your Ember 2 also comes complete
with the latest in lightweight electronic speed control technology, two linear
servos, a 3.7V 70mAh Li-Po flight battery and a convenient charger.