3 configure setpoints – Nor-Cal LCD Front Panel Interface User Manual
Page 4
4
4
Visit our Web Site
www.n-c.com
CONFIGURE SETPOINTS is the first sub-menu directly accessible from the MAIN MENU screen. Figure 10.2 shows a navigation tree detailing this part of the
function software.
MAIN
MENU
Figure 10.2 – CONFIGURE SETPOINTS Navigation Tree
The SELECT SETPOINT page allows the user to choose which set-point is to have
its parameters manipulated. All parameters of setpoints 1 to 5 can be set from this
screen. However, only the “tuning parameters” such as GAIN, PHASE and KAP can
be set for the ANALOG SETPOINT. The latter’s value and type are determined by
what input is provided on the Analog/TTL port.
More similar ones for SET
GAIN, SET PHASE and SET
10.3 CONFIGURE SETPOINTS