Dimplex Electric Fireplace DFG253A - Manual (Page 14)

14 www.dimplex.com
Maintenance
glass assembly. be aware that
some of the glass media may fall
out of the tray (Figure 8).
②
Empty the tray of glass media.
CAUTION: handle glass
media with care as some
pieces may have sharp edges.
⑥
unscrew bulb(s) counter
clockwise.
⑦
Insert new bulb(s).
⑧
Push flicker rod back onto
motor shaft and replace opposite
end of flicker rod back into
support bracket.
⑨
replace media tray back into
firebox.
⑩
Gently pour and evenly
spread the glass media.
⑪
replace glass assembly.
glass Cleaning
The front glass is cleaned in
the factory during the assembly
operation. During shipment,
installation, handling, etc., the
front glass may collect dust
particles, these can be removed
by dusting lightly with a clean dry
cloth.
To remove fingerprints or other
marks, the glass can be cleaned
with a damp cloth. The glass
should be completely dried with
a lint free cloth to prevent water
spots. To prevent scratching,
do not use abrasive cleaners or
Figure 8
Flicker rod
Glass media
and Tray
Front Glass
Assembly
③
Lift the tray up and remove
from firebox.
④
Pull flicker rod towards the
motor and bend gently to remove
the opposite end from the support
bracket.
⑤
remove flicker rod from motor
(see Figure 8).