Mossberg 69 User Manual
Page 9
7
RIFLE SIGHT ADJUSTMENTS
IRON SIGHTS:
Elevation may be adjusted by loosening the small screw in the center of the rear
sight. This will allow the sight blade to be moved upward or downward as required.
Windage may be adjusted by moving the rear sight base to the left or right in the
dovetail slot in the barrel. Place a wooden dowel or other object that will not dam-
age the finish, against the side of the sight base. Tap the dowel with a hammer until
the desired sight location is achieved.
Remember: Move the rear sight in the same direction you would like the shot to
move. For example, if the point of impact is lower and left of the point of aim, move
the rear sight upward and to the right.
66624 3/2/09 11:53 AM Page 7