Mossberg Silver Reserve Serie Over/Under - Manual (Page 5)

3
ASSEMBLY
Before assembly and/or performing any work on your firearm, visually
and physically inspect it to be sure that the firearm is completely
unloaded. Keep the firearm pointed in a safe direction at all times.
The shotgun is shipped from the factory with the barrel and forearm assemblies
disassembled from the receiver/stock assembly.
After carefully removing both components from the box, inspect the inside of both
barrels to ensure they are free of any excess oil, grease or obstructions.
Obstructions of any kind can cause damage to the firearm and may result in
serious personal injury to the shooter and/or others nearby.
To assemble the barrels to the receiver you must first remove the forend. Locate
the latch on the underside of the forend. Lifting the latch and pulling the forend
away from the barrels will allow you to remove the forend.
(Fig. 4)
BARREL
FOREARM
FOREARM
LATCH
FOREARM PLATE
67424 6/2/09 9:49 AM Page 3